1. Advanced filament : Eryone produce PLA+ with new raw materil, PLA+ is improved and upgraded based on normal PLA, high strength and better toughness. PLA+ will bring you a better printing experience.

2.Super Performance ：Good layer adhesion and no-plugging 3d printing filament, the printed material is very smooth, and the texture after printing is more delicate.

3.High Precision +/- 0.03mm Tolerance : 1.75mm PLA+ 3d filament (Tolerance Level : ± 0.03mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.

4.Adaptability : Good temperature and spped adaptability, can get good print result from the temperature range of 200~230℃, and the range of speed is 40mm/s-60mm/s.

5.Good Service：Eryone buyer support are here to assist you, professional after-sales consultation to provide you with technical support and best solutions.

Highlight
1. Good temperature adaptability, can get good print result from the range of 200~230℃

2. More suitable for novices

3. Good fluidity, compatible with most FDM3d printers on the market

4. The printing surface is smooth and the effect is good

5. Tougher than PLA, better resistance tensile performance
FAQ
1. If the filament is not used for a long time, please keep them in a cool (temperature lower than 32℃) and dry environment (humidity lower than 40%) in time

2. Please use a soft cloth to clean the nozzles before and after printing to prevent the residual filament from affecting the printer

3. If there is a problem of the clog, please check whether the feeder spring is too loose and causes the consumable to slip/too tight, which causes the filament to be damaged by the gear;

4. For more information, please refer to: www.eryone.com/forum